Design

How to retype a piece of furniture?

Pin
Send
Share
Send
Send


How to retype a piece of furniture?

A swallow in the drawers

For a beautiful decor in mind recollection, nothing better than a piece of furniture. Still need to know how to retype. Having the eye to find the rare pearl behind a 70s orange paint or a decrepit varnish is good. Give him a second life with a little elbow grease, it's better! Marie, from the blog A swallow in the drawers, gives us tips and tricks for sanding and restoring a piece of furniture like a pro.

Whether it was a flea market or inherited from our grandmother, the furniture to renovate is often legion in our interiors. Whether you want to keep it raw or repaint it, the essential step in restoring a piece of furniture is sanding. In other words: scrape with sandpaper to remove rough spots and remove paint and varnish. A mandatory step especially if you want to repaint for painting to hang on again. For that, it is not enough to take any abrasive paper or any piece of furniture, Marie, from the blog A swallow in the drawers gives us her advice!

To read also> I revook my old furniture with paint

Passionate about deco and china, Marie began by stripping furniture in her kitchen. After several years as a psychologist at work, she chose to tackle everything to live her passion thanks to the blog she had created - A swallow in the drawers - and on which she shares her inspi déco, her DIY and her creations. Now a blogger and furniture restaurateur full time, Marie has all the keys to teach us to retype our furniture like real pro.

Step 1: Prepare your equipment

The first question to ask before starting is the hardware. Is a sander mandatory? Can we work by hand? "There are several techniques for stripping a piece of furniture, explains Marie. Sanding remains the most effective and the easiest. It is possible to sand by hand but I do not recommend it. The ideal is the vibrating sander with a small triangular tip, easy to handle, it remains affordable. "

Read also> Strip wood: 4 tips not to be missed

Trade furniture before sanding

A swallow in the drawers

Trade furniture before sanding

A swallow in the drawers

Read also> An apartment decorated by the pros of China

Step 2: correctly choose your furniture

If this is the first time you sand a piece of furniture, it is better not to start immediately in the renovation of a large buffet covered with moldings. Start rather with a simple object and easy to work, we explain! "To choose your piece of furniture, what you have to look at is how it is done, if there are flat surfaces, or not. And pay attention to the finishes. As soon as there are rounds, we can no longer use sander. To renovate furniture when you do not know it, it is better that it has flat surfaces without corners, rounded or moldings. Choose a piece of furniture such as a table or dresser, "advises Marie.

"When you are in China you have to look at the general condition of the furniture. Instead, turn to solid wood that is much less fragile than veneerthe latter could jump and spoil. Look if there are no worms, holes made by parasites, especially at the feet, "she adds.

Also read> 7 tips for a successful flea market or garage sale

Finished craft furniture

A swallow in the drawers

"You have to be very careful with the finishes. Furniture already painted will be more difficult to sand. There are paintings that take off very well but there are others, like the painting of the 70s, which are very hard to remove. Also, with painted furniture, you may not see the wood defects. Lacquered lacquered furniture will be very hard to sand. A good indication? The more the varnish is matte, the more the furniture will be easy to sand, it means that the varnish is old and begins to deteriorate. My tip when you are shopping: think to look under the tray if it's a table. This part is not varnished and this will give you a good indication of the natural color of the wood."

Read also> Patine: The 5 mistakes to avoid

Step 3: choose the right finish

Finally, once the sanding is finished, it's up to you to see what finish you want to bring. In the state, the furniture is ready to be painted but if you wish to preserve the rough aspect, an additional step will be necessary anyway. "For finishing, either we leave the piece of furniture totally raw. It's possible for a piece of furniture that is not much usedlike a wardrobe. Otherwise, you have to protect it. There are three products to protect his furniture: wax, varnish and oil. The varnish will change the color of the wood and, if it is poorly applied, we may see the brushstrokes. I only use oil, which is easier to apply. It brings a small impermeability and offers a matte rendering. For the protection to continue, it must be done regularly, once a year for a table. Be careful, even if the oil is colorless, it always darkens the wood a little and can give it a hint of damp wood. "

Read also> I put on the recovery to decorate my living room

Wardrobe restored by Marie: the exterior was left in raw wood and the interior repainted in blue.

A swallow in the drawers

Read also> Repainting a piece of furniture: the 15 big mistakes to avoid

Pin
Send
Share
Send
Send