Terrace

Lay a wooden terrace yourself: the 4 mistakes to avoid

Pin
Send
Share
Send
Send


Lay a wooden terrace yourself: the 4 mistakes to avoid

iStock

Make a wooden terrace is the promise of afternoons lazy against a few hours of work. It is not difficult provided you adopt the right reflexes and avoid mistakes that may be fatal in the installation of a wooden deck yourself and successful installation: take terrace materials in poor quality wood, install a terrace overlooking the slope, too tight the deck boards ... Here are all our tips for laying a wooden deck yourself => To read also> Natural wood deck or composite wood: what you need to know

Owl, wood to put on my terrace! Make a wooden deck yourself you can save money, that's for sure. But beware of oversights, poor material choices etc. that can delay your work or even damage! So that your pose meets no unexpected, Côté House offers to discover the top 4 mistakes to avoid for build your wooden deck in an ideal way !

Read also> Laying a wooden terrace: the 5 rules to know

Mistake 1: Make a wooden deck with poor quality materials

It is best to use a class 4 wood for the structure. The joists must be in the same class of wood as the blades. When buying joists, the recommended widths and heights must also be respected.

To avoid accelerated corrosion of metal elements, use stainless steel fasteners, brackets and / or shoes made of stainless steel or hot-dip galvanized steel.

Also read> How to properly maintain your wooden deck?

Error 2: install a wooden terrace, forgetting the slope

The surface on which the wooden deck is to be laid must have a slope of at least 5% for the evacuation of rainwater. The highest point of the slope on the side of the house to avoid any problem of infiltration and humidity in the habitat. If the terrace is placed on soft ground, proceed with a slight earth moving before installing the wooden deck.

See also> Wooden terrace, nature comes to my place

Error 3: Lay the joists directly on the floor of the future wooden deck

It is recommended to place the joists on adjustable polymer deck pads. The joists placed on concrete pads must be insulated with rot-proof plastic shims.

Error 4: Tighten the boards of the wooden deck

The wood works in the direction of width, and it shrinks or expands depending on the humidity in the air. The space preserved between each blade will allow the evacuation of rain water and will prevent the blades from overlapping. When mounting, use 5 mm shims to ensure even spacing between the deck boards.

iStock

Pin
Send
Share
Send
Send